Here are the instructions I promised a while back @Bmatt123
And also thanks to @Akooldragoo for sharing his joints, so here is my contribution for knowledge expansion
Also this is my Oc Arashi who is now the 4th to receive this treatment so I can say it works
Image/steps
1: example
2: Let nature run its course and break it (Sobs hysterically)
3: Drill a 3 mm hole into the joint area and slightly cut it more with a xacto knife if adjustments are needed for step 7
4: Find an pen ink chamber that will allow new joint to snuggly for in without problem (this one is rather thicc so reducing its diameter is recommended)
5: if none found get a thinner ink chamber and drill it with a 3mm hole to allow joints to fit in (this is smol so be careful)
6: ^ it fits now
7: Cut the chamber to the part where the joint meets and superglue it into the body
8: POSE AGGRESSIVELY
And also thanks to @Akooldragoo for sharing his joints, so here is my contribution for knowledge expansion
Also this is my Oc Arashi who is now the 4th to receive this treatment so I can say it works
Image/steps
1: example
2: Let nature run its course and break it (Sobs hysterically)
3: Drill a 3 mm hole into the joint area and slightly cut it more with a xacto knife if adjustments are needed for step 7
4: Find an pen ink chamber that will allow new joint to snuggly for in without problem (this one is rather thicc so reducing its diameter is recommended)
5: if none found get a thinner ink chamber and drill it with a 3mm hole to allow joints to fit in (this is smol so be careful)
6: ^ it fits now
7: Cut the chamber to the part where the joint meets and superglue it into the body
8: POSE AGGRESSIVELY