Flood: the Making of

flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
Avatar image of TacticalSponge
By TacticalSponge Dec 03, 2017
Here are some pictures of my flood figure as it was being made. The green stuff is literally called 'green stuff', which is a sculpting epoxy you mix together. It can be found on amazon.

Groups

Halo™

5 Comments

Avatar image of TheArbiterofblocks
TheArbiterofblocks Dec 04, 2017

Cool man!!!

Avatar image of TacticalSponge
TacticalSponge Dec 03, 2017

@SpartanGregor113 I forgot to explain that part. What I did was cut the head off where the hole for the helmet to peg into was with an x-acto knife, turn it upside down and glue it in place. When the glue was dry, I spread a thin layer of epoxy putty around the neck so there wasn't a visible seam from where I cut.

Avatar image of SpartanGregor113
SpartanGregor113 Dec 03, 2017

Still not sure how you made the elite head face that way....

Avatar image of Boo101
Boo101 Dec 03, 2017

Awesome! :-)

Avatar image of mrjustin412
mrjustin412 Dec 03, 2017

Interesting! That is a major difference from the original figure to W.I.P. to the finished figure!

flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of
flood-the-making-of

Install: Mega™ Unboxed

Tap then "Add to Home Screen"